+P ammo, short for overpressure ammunition, refers to cartridges loaded to a higher internal pressure than standard ammunition of the same caliber. This results in increased bullet velocity and energy, enhancing performance for self-defense, hunting, and certain tactical applications.

+P Ammo | Plus P Ammo | Ammunition Depot

Q: Is +P ammunition safe to use in all firearms?

No, +P ammunition is not safe for all firearms. It should only be used in firearms specifically rated for +P loads by the manufacturer. Using +P ammunition in firearms not designed for it can result in excessive wear, increased recoil, and potential safety hazards.

Q: Are +P ammo and +P+ ammo the same?

No, +P and +P+ ammunition are not the same. +P+ ammo is loaded to even higher pressure levels than +P and is not regulated by SAAMI (Sporting Arms and Ammunition Manufacturers' Institute). Since +P+ pressure levels vary by manufacturer, it may not be safe for all firearms.

Q: Can +P ammo be used for self-defense?

+P ammunition offers increased velocity and stopping power, making it a preferred choice for self-defense in certain situations. However, standard ammunition remains effective for most self-defense needs, and the choice should depend on firearm capability and shooter preference.

What is +P Ammunition?

The creation of +P ammunition, denoting "overpressure" ammunition, can be attributed to the evolving demands of firearms technology in the early 20th century.

As firearms became more sophisticated, standard ammunition, designed to operate at relatively low pressures for safety and versatility across various firearm types, began to exhibit limitations in stopping power and performance.

While it's challenging to pinpoint a single individual or entity responsible for its inception, ammunition manufacturers played a pivotal role in its development.

The need for increased firepower, especially during periods like World War I, spurred experimentation with higher-pressure loads.

Bearing the "+P" designation, these loads marked their operation at pressures exceeding the standard.

This innovation led to the birth of +P ammunition, catering to the growing demand for cartridges with greater muzzle velocity and energy, ultimately enhancing terminal ballistics and advancing firearms and ammunition technology.

As firearm and ammunition technologies continued to evolve over the years, manufacturers began developing firearms designed explicitly for +P ammo.

These firearms featured reinforced components and chambers, allowing them to withstand the increased pressures and demands of +P calibers.

Today, +P ammunition is readily available throughout the commercial market and is particularly popular with civilians who commonly use it for personal or self-defense.

However, shooters must exercise caution and ensure their firearms are rated for +P ammunition, which generates higher pressures.

Using +P ammo in a gun not designed for it can lead to excessive wear and recoil.

How +P Ammo Works & Why Shooters Use It

How +P Ammo Works

+P ammo functions by using carefully calibrated powder charges that create greater internal pressure when fired compared to traditional loads.

This higher pressure can generate increased energy and velocity, depending on the cartridge type and manufacturer’s design. Importantly, +P ammunition is produced to strict standards that differentiate it from both standard-pressure and significantly higher-pressure specialty ammunition.

Overpressure markings on the box or cartridge headstamp clearly indicate the designation so shooters can identify it at a glance.

Why Shooters Use +P Ammo

Shooters choose +P ammunition for a variety of reasons, most of which relate to its enhanced ballistic characteristics and performance consistency:

Improved Ballistic Output: Many enthusiasts appreciate that +P ammo is engineered to provide a measurable boost in velocity and energy, giving it enhanced performance compared to standard-pressure loads.
Modern Engineering and Quality Control: Because +P rounds must meet stricter pressure standards, they are often manufactured with high-quality powders, tighter tolerances, and consistent performance metrics. Many shooters value this level of engineering.
Popular in Specific Calibers: Some calibers, such as 9mm, .38 Special, and .45 ACP, are well-known for offering +P variants. These options allow enthusiasts to choose loads that best fit their preferences for performance, platform compatibility, or personal confidence.
Strong Support from Ammunition Manufacturers: Major brands like Federal, Winchester, Hornady, and Speer consistently produce +P offerings, contributing to its widespread availability and trusted reputation throughout the shooting sports community.
Enhanced Versatility for Experienced Shooters: Some experienced shooters prefer +P ammunition because it provides a broader range of performance choices across different firearm types that are rated for overpressure cartridges.

+P Ammunition Features & Benefits

Increased Stopping Power

+P ammo typically delivers higher muzzle velocity and energy, resulting in increased stopping power.
This can be crucial in self-defense situations or when dealing with larger or more resilient game during hunting.

Enhanced Terminal Ballistics

The higher velocity of +P ammunition can lead to better terminal ballistics, meaning the bullet is more effective upon impact.
This can result in quicker incapacitation of a threat or improved performance when hunting.

Improved Penetration

The increased velocity and energy of +P rounds can lead to better penetration, making them suitable for scenarios where barriers or clothing might be encountered.

Versatility

Many firearms designed for self-defense, duty use, or hunting are rated for +P ammunition.
This versatility allows shooters to use the same firearm for different purposes.

Effective Range

+P ammunition often exhibits a flatter trajectory and better long-range performance compared to standard loads.
This makes it suitable for shooting accurately at longer distances.

Flexibility

Shooters can choose to carry +P ammunition for self-defense purposes while using standard ammunition for training and practice, ensuring that they are well-prepared for real-life scenarios.

Popular +P Ammo Types & Recommended Defensive Loads

9mm +P

Speer Gold Dot +P
Federal HST +P
Winchester Ranger T-Series +P

38 Special +P

Federal Premium Hydra-Shok +P
Hornady Critical Defense +P
Speer Gold Dot Short Barrel +P

45 ACP +P

Federal Premium HST +P
Speer Gold Dot +P
Winchester Ranger T-Series +P

380 ACP +P

Underwood Ammo Xtreme Defender +P
Buffalo Bore +P
Hornady Critical Defense +P

357 Magnum +P

Buffalo Bore Heavy Outdoorsman +P
Federal Premium Personal Defense +P
Speer Gold Dot Short Barrel +P

40 S&W +P

Winchester Ranger T-Series +P
Federal Premium HST +P
Hornady Critical Duty +P

5.56 NATO/.223 Remington +P

Hornady Superformance Match +P
DoubleTap Ammunition Match +P

7.62x39mm +P

Hornady V-MAX +P
Wolf Performance Ammunition Military Classic +P

SAAMI & Safety: Pressure Ceilings for +P Ammo

For modern +P ammunition, SAAMI has established pressure ceiling standards that manufacturers must adhere to. These standards ensure that +P ammo remains safe in firearms that handle increased pressure levels.

SETTING SAFE PRESSURE LEVELS

SAAMI's primary role is to set safe pressure levels for ammunition, including +P loads.
These pressure limits are established through extensive testing and research to ensure that firearms chambered for +P ammunition can safely handle the increased pressures generated by these rounds.

PRESERVING FIREARM INTEGRITY

Because +P ammunition generates higher chamber pressures than standard ammunition, SAAMI's pressure ceiling helps to prevent excessive wear and potential damage to firearms, keeping them within safe limits for the specific caliber and type.

CALIBER-SPECIFIC STANDARDS

SAAMI sets pressure limits for each caliber and cartridge type individually.
The pressure ceiling for +P ammunition may vary depending on the specific caliber, such as 9mm +P, .38 Special +P, or .45 ACP +P. Manufacturers must adhere to these caliber-specific standards when producing +P ammunition.

SAFETY AND CONSISTENCY

SAAMI's standards promote safety and ensure consistency across the industry.
These standards give shooters confidence that +P ammunition from different manufacturers will conform to the same safety standards and performance characteristics.

CLEAR LABELING

Ammunition manufacturers are required to label their +P ammunition clearly.
This labeling informs shooters that the rounds are loaded to higher pressures and should only be used in firearms rated for +P loads.

FIREARM COMPATIBILITY

Shooters need to know that not all guns are rated for +P ammunition.
Using +P rounds in firearms not designed to handle the increased pressures can be unsafe and may lead to premature wear or damage.

In summary, SAAMI's pressure ceiling for modern +P ammunition ensures that these rounds are produced with safety in mind.

These standards are established to protect shooters and their firearms while providing the enhanced performance characteristics that make +P ammunition a popular choice for self-defense and other applications.

Shooters should always check their firearm's owner's manual and adhere to SAAMI's guidelines when using +P ammunition.

+P Ammunition FAQs

QUESTION: What is +P ammo?
ANSWER: +P ammo, short for overpressure ammunition, is a type of ammunition loaded to higher internal pressure levels compared to standard ammunition of the same caliber. This increased pressure results in higher bullet velocity and energy, offering enhanced performance for specific applications like self-defense and hunting.

QUESTION: Is +P ammunition safe to use in all firearms?
ANSWER: No, +P ammunition is not safe to use in all firearms. It should only be used in firearms explicitly rated by the manufacturer for +P loads. Using +P ammunition in firearms not designed for it can result in excessive wear, increased recoil, and potential safety hazards.

QUESTION: What are the advantages of +P ammo?
ANSWER: +P ammunition offers several advantages, including increased stopping power, enhanced terminal ballistics, extended effective range, and improved penetration. These benefits make it a popular choice for self-defense, hunting, and certain competitive shooting disciplines.

QUESTION: Can I use +P ammo for target practice?
ANSWER: While +P ammunition can be used for target practice, it is often more expensive than standard ammunition. Many shooters choose to use standard ammunition for practice to save costs and reserve +P ammo for situations where its enhanced performance is needed.

QUESTION: Does +P ammo have more recoil than standard ammo?
ANSWER: Yes, +P ammunition typically generates more recoil due to its higher muzzle velocity and energy. Shooters should be prepared for increased recoil when using +P loads and practice to become accustomed to it.

QUESTION: How can I identify +P ammunition?
ANSWER: +P ammunition is usually labeled as such on the cartridge box and the headstamp of the ammunition casing. Look for the +P designation to confirm that the ammunition is loaded to higher pressure levels.

QUESTION: Are +P ammo and +P+ ammo the same?
ANSWER: No, +P ammo and +P+ ammo are not the same. +P+ ammunition denotes cartridges loaded to even higher pressure levels than +P ammunition. The use of +P+ ammunition is not standardized, and it may exceed SAAMI pressure guidelines.

QUESTION: Can +P ammunition damage my firearm?
ANSWER: Using +P ammunition in a firearm not rated for it can lead to premature wear and potential damage to the firearm's components, particularly the chamber and barrel.

QUESTION: Can +P ammo be used for self-defense?
ANSWER: While +P ammunition can provide enhanced performance for self-defense, standard ammunition is also effective for most self-defense scenarios. The choice between standard and +P ammunition depends on individual preferences and the specific characteristics of the firearm being used.

()

()

()

()

+P Ammo