+P Ammo | Plus P Ammo | Ammunition Depot

Ammunition Depot is your trusted destination when shopping for cheap online ammunition. View our extensive selection of 9mm +P ammo, 38 +P ammo, and more from the brands you trust. Learn More

1000rounds / $0.44per round

Blazer Aluminum 38 Special 158 Grain +P FMJ (Case)

Special Price $444.99 Regular Price $489.99
50rounds / $0.52per round

Blazer Aluminum 38 Special 158 Grain +P FMJ

Special Price $25.79 Regular Price $37.99

About +P Ammo

The creation of +P ammunition, denoting "overpressure" ammunition, can be attributed to the evolving demands of firearms technology in the early 20th century.

As firearms became more sophisticated, standard ammunition, designed to operate at relatively low pressures for safety and versatility across various firearm types, began to exhibit limitations in stopping power and performance.

While it's challenging to pinpoint a single individual or entity responsible for its inception, ammunition manufacturers played a pivotal role in its development.

The need for increased firepower, especially during periods like World War I, spurred experimentation with higher-pressure loads.

Bearing the "+P" designation, these loads marked their operation at pressures exceeding the standard.

This innovation led to the birth of +P ammunition, catering to the growing demand for cartridges with greater muzzle velocity and energy, ultimately enhancing terminal ballistics and advancing firearms and ammunition technology.

As firearm and ammunition technologies continued to evolve over the years, manufacturers began developing firearms designed explicitly for +P ammo.

These firearms featured reinforced components and chambers, allowing them to withstand the increased pressures and demands of +P calibers.

Today, +P ammunition is readily available throughout the commercial market and is particularly popular with civilians who commonly use it for personal or self-defense.

However, shooters must exercise caution and ensure their firearms are rated for +P ammunition, which generates higher pressures.

Using +P ammo in a gun not designed for it can lead to excessive wear and recoil.

+P Ammunition Features

Increased Stopping Power
+P ammo typically delivers higher muzzle velocity and energy, resulting in increased stopping power. This can be crucial in self-defense situations or when dealing with larger or more resilient game during hunting.

Enhanced Terminal Ballistics
The higher velocity of +P ammunition can lead to better terminal ballistics, meaning the bullet is more effective upon impact. This can result in quicker incapacitation of a threat or improved performance when hunting.

Improved Penetration
The increased velocity and energy of +P rounds can lead to better penetration, making them suitable for scenarios where barriers or clothing might be encountered.

Versatility
Many firearms designed for self-defense, duty use, or hunting are rated for +P ammunition. This versatility allows shooters to use the same firearm for different purposes.

Effective Range
+P ammunition often exhibits a flatter trajectory and better long-range performance compared to standard loads. This makes it suitable for shooting accurately at longer distances.

Flexibility
Shooters can choose to carry +P ammunition for self-defense purposes while using standard ammunition for training and practice, ensuring that they are well-prepared for real-life scenarios.

Popular +P Ammo Types

9mm +P

Speer Gold Dot +P
Federal HST +P
Winchester Ranger T-Series +P

38 Special +P

Federal Premium Hydra-Shok +P
Hornady Critical Defense +P
Speer Gold Dot Short Barrel +P

45 ACP +P

Federal Premium HST +P
Speer Gold Dot +P
Winchester Ranger T-Series +P

380 ACP +P

Underwood Ammo Xtreme Defender +P
Buffalo Bore +P
Hornady Critical Defense +P

357 Magnum +P

Buffalo Bore Heavy Outdoorsman +P
Federal Premium Personal Defense +P
Speer Gold Dot Short Barrel +P

40 S&W +P

Winchester Ranger T-Series +P
Federal Premium HST +P
Hornady Critical Duty +P

5.56 NATO/.223 Remington +P

Hornady Superformance Match +P
DoubleTap Ammunition Match +P

7.62x39mm +P

Hornady V-MAX +P
Wolf Performance Ammunition Military Classic +P

SAAMI’s Pressure Ceiling for +P Ammo

For modern +P ammunition, SAAMI has established pressure ceiling standards that manufacturers must adhere to. These standards ensure that +P ammo remains safe in firearms that handle increased pressure levels.

SETTING SAFE PRESSURE LEVELS
SAAMI's primary role is to set safe pressure levels for ammunition, including +P loads.

These pressure limits are established through extensive testing and research to ensure that firearms chambered for +P ammunition can safely handle the increased pressures generated by these rounds.

PRESERVING FIREARM INTEGRITY
Because +P ammunition generates higher chamber pressures than standard ammunition, SAAMI's pressure ceiling helps to prevent excessive wear and potential damage to firearms, keeping them within safe limits for the specific caliber and type.

CALIBER-SPECIFIC STANDARDS
SAAMI sets pressure limits for each caliber and cartridge type individually. The pressure ceiling for +P ammunition may vary depending on the specific caliber, such as 9mm +P, .38 Special +P, or .45 ACP +P.

Manufacturers must adhere to these caliber-specific standards when producing +P ammunition.

SAFETY AND CONSISTENCY
SAAMI's standards promote safety and ensure consistency across the industry. These standards give shooters confidence that +P ammunition from different manufacturers will conform to the same safety standards and performance characteristics.

CLEAR LABELING
Ammunition manufacturers are required to label their +P ammunition clearly. This labeling informs shooters that the rounds are loaded to higher pressures and should only be used in firearms rated for +P loads.

FIREARM COMPATIBILITY
Shooters need to know that not all guns are rated for +P ammunition. Using +P rounds in firearms not designed to handle the increased pressures can be unsafe and may lead to premature wear or damage.

In summary, SAAMI's pressure ceiling for modern +P ammunition ensures that these rounds are produced with safety in mind.

These standards are established to protect shooters and their firearms while providing the enhanced performance characteristics that make +P ammunition a popular choice for self-defense and other applications.

Shooters should always check their firearm's owner's manual and adhere to SAAMI's guidelines when using +P ammunition.

+P Ammunition FAQ

QUESTION: What is +P ammo?

ANSWER: +P ammo, short for overpressure ammunition, is a type of ammunition loaded to higher internal pressure levels compared to standard ammunition of the same caliber.

This increased pressure results in higher bullet velocity and energy, offering enhanced performance for specific applications like self-defense and hunting.

QUESTION: Is +P ammunition safe to use in all firearms?

ANSWER: No, +P ammunition is not safe to use in all firearms. It should only be used in firearms explicitly rated by the manufacturer for +P loads.

Using +P ammunition in firearms not designed for it can result in excessive wear, increased recoil, and potential safety hazards.

QUESTION: What are the advantages of +P ammo?

ANSWER: +P ammunition offers several advantages, including increased stopping power, enhanced terminal ballistics, extended effective range, and improved penetration.

These benefits make it a popular choice for self-defense, hunting, and certain competitive shooting disciplines.

QUESTION: Can I use +P ammo for target practice?

ANSWER: While +P ammunition can be used for target practice, it is often more expensive than standard ammunition.

Many shooters choose to use standard ammunition for practice to save costs and reserve +P ammo for situations where its enhanced performance is needed..

QUESTION: Does +P ammo have more recoil than standard ammo?

ANSWER: Yes, +P ammunition typically generates more recoil due to its higher muzzle velocity and energy. Shooters should be prepared for increased recoil when using +P loads and practice to become accustomed to it.

QUESTION: How can I identify +P ammunition?

ANSWER: +P ammunition is usually labeled as such on the cartridge box and the headstamp of the ammunition casing.

Look for the +P designation to confirm that the ammunition is loaded to higher pressure levels.

QUESTION: Are +P ammo and +P+ ammo the same?

ANSWER: No, +P ammo and +P+ ammo are not the same. +P+ ammunition denotes cartridges loaded to even higher pressure levels than +P ammunition.

The use of +P+ ammunition is not standardized, and it may exceed SAAMI pressure guidelines.

QUESTION: Can +P ammunition damage my firearm?

ANSWER: Using +P ammunition in a firearm not rated for it can lead to premature wear and potential damage to the firearm's components, particularly the chamber and barrel.

QUESTION: Can +P ammo be used for self-defense?

ANSWER: While +P ammunition can provide enhanced performance for self-defense, standard ammunition is also effective for most self-defense scenarios.

The choice between standard and +P ammunition depends on individual preferences and the specific characteristics of the firearm being used.